S-34.1, r. 2 - Regulation respecting petroleum exploration, production and storage on land

Section 130 Disposition versions

2018-09-20

130. The authorization holder must design and construct the well so as to

(1)  comply with the Industry Recommended Practice, IRP: #25, Primary Cementing, published by the Drilling and Completions Committee;

(2)  ensure work safety;

(3)  prevent incidents in the maximum load conditions normally foreseeable during the life cycle of well;

(4)  withstand potential conditions, forces and stresses;

(5)  ensure a resistance sufficient for fluid kicks;

(6)  protect the integrity of the groundwater;

(7)  ensure that the petroleum zones and the aquifer layers are isolated from one another;

(8)  allow the characterization of the geological formations targeted; and

(9)  allow activities for controlling the pressure of the bottom of the wellbore in a constant and safe manner.

O.C. 1252-2018, s. 130.

Not in force

In force: 2018-09-20

130. The authorization holder must design and construct the well so as to

(1)  comply with the Industry Recommended Practice, IRP: #25, Primary Cementing, published by the Drilling and Completions Committee;

(2)  ensure work safety;

(3)  prevent incidents in the maximum load conditions normally foreseeable during the life cycle of well;

(4)  withstand potential conditions, forces and stresses;

(5)  ensure a resistance sufficient for fluid kicks;

(6)  protect the integrity of the groundwater;

(7)  ensure that the petroleum zones and the aquifer layers are isolated from one another;

(8)  allow the characterization of the geological formations targeted; and

(9)  allow activities for controlling the pressure of the bottom of the wellbore in a constant and safe manner.

O.C. 1252-2018, s. 130.